Cellular Metabolism
1. Define anabolism and catabolism.
Anabolism uses energy to build large molecules from smaller ones. Catabolism releases energy by breaking large molecules into smaller ones.
2. Distinguish between dehydration synthesis and hydrolysis.
Dehydration synthesis is a special form of anabolism where larger molecules are formed by removing an –OH (hydroxyl group) from the end of one molecule and an –H (hydrogen atom) from the end of another. The –OH and –H combine to form H2O (water), and the ends of the two molecules join by sharing the remaining oxygen atom.
Hydrolysis is the opposite of dehydration synthesis. In hydrolysis, a large molecule is split apart at a certain point and a hydrogen atom is attached to one of the new molecules, while a hydroxyl group is attached to the other.
Both of these processes can occur over and over until the original molecule is altered to the cell’s needs. In
short, dehydration synthesis dehydrates a molecule and hydrolysis rehydrates it.
3. Define peptide bond?
A peptide bond is found in proteins. It is formed during dehydration synthesis when the carbon atom of one amino acid joins with the nitrogen atom of the other amino acid.
4. Define enzyme.
An enzyme is usually a globular protein that catalyzes the reactions of substances by lowering the activation energy required to cause the desired effect.
5. How does an enzyme interact with its substrate?
The surface of an enzyme contains areas called active sites that will bind to a specific substrate only. When the correct substrates are attached to the active sites (called an enzyme-substrate complex), the enzyme alters the shapes of the substrates in a way that promotes the reaction. All enzymes demonstrate this specificity to its substrates. To illustrate, an enzyme-substrate complex is like a “lock-and-key” model with the enzyme as the lock and the substrate as the key. Although many keys may fit the lock, only one type of key will make it work.
6. List three factors that increase the rates of enzyme-controlled reactions.
The three factors are:
a. an increase in the enzyme concentration,
b. an increase in the substrate concentration, and
c. the general efficiency of the particular enzyme.
7. How are enzymes usually named?
Enzymes are generally named for the substrate it interacts with, plus the suffix “-ase”. For instance, the
enzyme that interacts with lipids is called lipase.
8. Define cofactor.
A cofactor is a separate non-protein molecule that binds to an enzyme to aid in the reaction. Usually, a
cofactor is a non-organic molecule. A coenzyme is a cofactor that is an organic molecule.
9. Explain why humans require vitamins in their diets.
Vitamins are organic substances that either cannot be synthesized by the human body, or are synthesized in
quantities that are inadequate. For this reason, vitamins must be consumed in the diet.
10. Explain how an enzyme may be denatured.
Since enzymes are proteins, they can be denatured. This is the process of breaking the hydrogen bonds within the protein thereby rendering it useless. High heat, excessive radiation or electricity, and certain chemicals and fluids with extreme pH values cause denaturation. A good example is the egg white during frying. It starts a clear color and turns white upon application of the heat. This is the protein being denatured. This is a permanent process and cannot be reversed.
11. Define energy.
Energy, by definition, is the ability to do work.
12. Explain how the oxidation of molecules inside cells differs from the burning of substances outside cells.
The burning of a substance outside the cell usually requires large amounts of energy to start the reaction. This burning indiscriminately breaks all chemical bonds in the substance and releases the energy as light and heat.
Oxidation inside the cell utilizes enzymes that require less activation energy, controls the by-products released, and uses certain energy capturing molecules to trap about one-half of the released energy for use elsewhere.
The rest is lost as heat.
13. Define cellular respiration.
The controlled, sequential process of oxidation and energy recapture is referred to as cellular respiration.
14. Distinguish between anaerobic and aerobic respiration.
During cellular respiration, the oxidative processes that occur in the absence of oxygen are called anaerobic respiration. The oxidative processes that require the presence of oxygen for their reactions are called aerobic respiration.
15. Explain the importance of ATP to cellular processes.
ATP is the primary energy-carrying molecule in the cell. It acts as a rechargeable battery for cellular processes by carrying energy in the terminal bond of the phosphate molecule and returning to recapture energy when it is used. Without ATP, the cell would die.
16. Describe the relationship between ATP and ADP molecules.
ATP releases its energy by breaking off the third, or terminal, phosphate molecule. When this occurs, it becomes ADP (with only two phosphate molecules). The ADP returns to “recharge” by picking up a third
phosphate molecule with energy, and the cycle repeats.
17. Define metabolic pathway?
A metabolic pathway is a sequence of enzyme-controlled reactions required to convert substances into useable forms. These pathways are interconnected so that substances can be catabolized or anabolized per the needs of the cells at that particular time.
18. Describe the starting material and products of glycolysis.
Glucose is the starting material for glycolysis. In order for glucose to be used for energy production, it must be broken down by enzymes. To begin, ATP donates one phosphate molecule to the end of the glucose, and the glucose is rearranged into fructose. Then another ATP donates a phosphate molecule to the other end. These first steps are called phosphorylation because phosphates are being used in the alteration of the molecule. At this point, the fructose is split into two three-carbon sugars. A second phosphate is again added to each molecule and two hydrogen atoms are separated from each for use in the electron transport system. The molecules each lose one phosphate molecule to an ADP molecule (making two ATP). At this point, the molecules are rearranged twice to produce a pyruvic acid configuration with an attached phosphate. In the final step, the phosphate is lost to an ADP (converting to ATP) and the result is pyruvic acid.
In the presence of oxygen, a pyruvic acid molecule is oxidized into an acetyl group that combines with a molecule of coenzyme A. This step also releases two hydrogen atoms for each converted acetyl group. In the absence of oxygen, the pyruvic acid is converted into lactic acid. When oxygen is again available, the lactic acid is converted back into pyruvic acid for use in energy production.
19. State the products of the citric acid cycle.
The final products of the citric acid cycle (Kreb’s cycle) are 38 ATP molecules. 36 ATP molecules can be
used. The other two ATP molecules must be reused to start the process over again.
20. How are carbohydrates stored?
In the presence of excess glucose, such as after a meal, cells send the sugar into anabolic pathways for conversion into glycogen for storage. The liver and the muscle cells do the majority of the storage because they need constant reserves for activity. If the glycogen reserves have been filled, the excess glucose is converted into fat and stored in fat tissues. Because the body can perform this conversion without limits, overeating can cause obesity.
21. Explain how one enzyme can regulate a metabolic pathway.
Typically, the first enzyme in a pathway regulates the rate at which the pathway can work. This enzyme is
called a rate-limiting enzyme because it is present in a limited quantity, and once saturated with substrates, the rate of reaction will not increase.
22. Describe how a negative feedback mechanism can help control a metabolic pathway.
The final product of the pathway can inhibit the rate-limiting enzyme. As the final product accumulates, it inhibits the rate of the first enzyme, regardless of the concentration of substrates. This negative feedback
mechanism helps prevent excess product from being produced.
23. Explain the chemical basis of genetic information.
Deoxyribonucleic acid (DNA) is a nucleic acid that contains the genetic information. It is composed of the 5-carbon sugar deoxyribose, a phosphate group, and one of several organic, nitrogenous bases. The four bases associated with DNA are adenine, thymine, cytosine, and guanine. These bases pair systematically, which bind the two long polynucleotide chains together. The entire molecule is then twisted into a double helix.
24. Describe the chemical makeup of a gene.
A gene is a specific “blueprint” for a protein or enzyme. Depending on how the base pairs are arranged, they will code for different proteins. Each gene is a variation of the possible proteins that code for a specific trait.
25. Describe the general structure and components of a DNA molecule.
A DNA molecule looks like a ladder in form. It is composed of two polynucleotide chains, with a backbone of sugars and phosphates, and nitrogenous bases projecting outward on one side. The sugar phosphate backbones make the uprights of the ladder, while the nitrogenous bases, linked together by hydrogen bonds, make the rungs.
The bases are paired in only one pattern across the DNA molecule. Adenine (A) binds only with thymine (T), and cytosine (C) binds only with guanine (G). These combinations are called complimentary base pairs.
Because the DNA molecule is so large, it is twisted into a double-helix to conserve space.
26. Distinguish between the functions of messenger RNA and transfer RNA.
A messenger RNA (mRNA) molecule is a special type of RNA that is made of the complementary base sequences, necessary for the production of a protein, from the DNA molecule. Transfer RNA (tRNA) is a
group of RNA molecules that bind to activated amino acids in the cytoplasm and bring them to the mRNA molecule for assembly into a protein. A tRNA molecule can bind with only one kind of amino acid. Therefore, since there are twenty different amino acids, there must be at least twenty different kinds of tRNA molecules.
27. Distinguish between transcription and translation.
The process by which an mRNA molecule is formed from DNA is called transcription. The synthesis of protein molecules from the mRNA is called translation.
28. Explain two functions of ribosomes in protein synthesis.
In protein synthesis, a ribosome moves along with the mRNA and knits together a chain of amino acids by
attaching itself to a portion of the mRNA and bonding with the complementary amino acid on a tRNA molecule. As it moves along the mRNA, it attaches each amino acid in sequence and releases the empty tRNA back into the cytoplasm.
29. Distinguish between a codon and an anticodon.
The sequences of nucleotides on an mRNA molecule are called codons. These are complimentary sets of bases from the DNA molecule. An anticodon is the compliment of the complimentary sequence on the mRNA molecule. Each is a set of three nucleotides that describe an amino acid.
30. Explain how a DNA molecule is replicated.
During a phase before cell reproduction an enzyme called DNA polymerase breaks the hydrogen bonds between the complimentary base pairs of the DNA molecule. As the DNA molecule splits and unwinds, new nucleotides bond with the exposed nucleotides of the parental strand and a new sugar-phosphate backbone is built. The result is two complete DNA molecules, each containing one parental strand and one daughter strand.
These DNA molecules are then separated so that each new cell receives one complete DNA molecule.
31. Define mutation, and explain how mutations may originate.
A mutation is defined as a mistake in, or damage to, the DNA strand that is not corrected and is passed on to the new cells. Mutations can occur during replication when an incorrect nucleotide or extra nucleotides bind to the parental DNA strand. Mutations can also occur if sections of the DNA strands are deleted, misplaced, or attached to the wrong chromosome.
32. Define repair enzyme.
If the mutation to a DNA molecule occurs only on one strand, the cell uses special enzymes called repair enzymes to clip out the defective portion and rebuild it correctly.
33. Explain how a mutation may affect an organism’s cells or not affect them?
Because of the importance of the DNA molecule, there are many safeguards against mutation. For instance,
there are sixty-one codons that specify the twenty amino acids. If the mutation occurs in the third nucleotide of a codon, it is likely that this mutation will still yield the correct amino acid. If the mutation is in the second codon, the new sequence will generally yield a structure similar enough to the original amino acid that the effect would not be significant. There are two copies of each chromosome in an adult cell. If one chromosome is mutated, the genes of the second chromosome will usually provide enough normal “blueprints” to maintain the health of the cell.
No comments:
Post a Comment